Heavy-duty gaps require heavy-duty seals. Froth-Pak™ Spray Foam Sealant is a two-component, quick-cure polyurethane foam that fills penetrations and cracks with significantly reduced curing time.
This heavy-duty, two-component foam seals out moisture, dust, allergens, and pests while improving energy efficiency, and our newly reformulated product delivers a GWP reduction of over 99%. Our new Froth-Pak™ Spray Foam Sealant contains no ozone-depleting chemicals or HFCs while elevating the performance attributes you have come to expect.
Froth-Pak™ Spray Foam Sealant is a two-component, quick-cure polyurethane foam that fills penetrations and cracks in rim joists, roof wall junctures and around pipes and ducts greater than 2" and less than 4" wide. Froth-Pak™ Sealant is a chemically cured foam designed to significantly reduce curing time. It dispenses, expands and becomes tack-free in seconds, saving pros time on the jobsite.
Froth-Pak™ Sealant Spray Foam Kit 120 yields approximately 120 board feet. Each self-contained kit contains an ISO (A) cylinder, a Polyol (B) cylinder, Insta-Flo™ Dispensing Spray Gun, 6 cone spray nozzles, 4 fan spray nozzles, and a 9’ gun hose assembly.
Froth-Pak™ Sealant Spray Foam Kit 200 yields approximately 200 board feet. Each self-contained kit contains an ISO (A) cylinder, a Polyol (B) cylinder, Insta-Flo™ Dispensing Spray Gun, 6 cone spray nozzles, 4 fan spray nozzles, and a 9’ gun hose assembly.
Froth-Pak™ Sealant Spray Foam Kit 620 yields approximately 620 board feet.
Why did Froth-Pak™ change?
With our customers and the environment at the center of everything we do, DuPont is committed to the transition to more sustainable buildings while ensuring our products continue to deliver the high level of performance our customers trust and expect. We’re committed to delivering solutions that address climate change, drive the circular economy, deliver safer solutions and help communities thrive.
HFC-free Froth-Pak™ is a demonstration of our continued commitment to providing the market with products that address environmental challenges while meeting the needs of our customers. We’re committed to delivering better solutions that address climate change, drive the circular economy, deliver safer solutions and help communities thrive.
Does the new Froth-Pak Formulation have the same performance as the legacy formulation?
The newly enhanced, innovative solution delivers a global warming potential (GWP) reduction of more than 99% as compared to current formulations and contains no ozone-depleting chemicals or HFCs while enhancing the performance attributes professional contractors expect from Froth-Pak™. Froth-Pak™ Spray Foam now has improved curing time, reduced overspray with new patent-pending application nozzles, and further improved its closed cell content.
Can we use the old nozzles with the updated Froth-Pak™ formulation?
No, the older version of our nozzle design should not be used with the new, reformulated HFC-free Froth-Pak™.
Is the legacy formulation of Froth-Pak™ still available for purchase?
No, in support of our sustainability goals, all Froth-Pak™ products will only be available for purchase in the new, low-GWP, HFC free formulation.
What “R” Values can be achieved with Froth-Pak™ Insulation and Sealant?
For Froth-Pak™ Sealant the LTTR value (Long term thermal resistance) measurement at 1 inch thick is 5.3 ft²•h•°F/Btu (R value) per inch. When sprayed to 2 inches thick the LTTR value (Long term thermal resistance) measurement at 2 inch thick is 5.5 ft²•h•°F/Btu (R value) per inch which is R11.0 at 2 inches thick.
For Froth-Pak™ Insulation (Aged 180 days @ 75°F):
R-Value (ASTM C518, F.ft2.h/Btu)
6.0 (when sprayed at 1 inch thick)
12.2 (R5.6/inch when sprayed at 2 inches)
Pipe and Plumbing Penetrations
While you’re at it, check out how other ways you can seal, insulate, and reduce energy costs in high-loss areas around your home.
CHECK OUT OUR OTHER PRODUCTS
There’s a solution for every seal. See what else GREAT STUFF™ has to offer.
The all-in-one solution for professionals to quickly fill and larger cavities, sealing out moisture, dust and pests.
Uses a flow-control mechanism that dispenses beads from 1/8” to 3” to provide greater precision and access to hard-to-reach areas.
Bonds to wood, metal, masonry, glass and most plastics to fill gaps and cracks up to 3" while blocking the spread of smoke.
Specifically formulated to stop drafts by air sealing the gap between the window or door frame and its rough opening.
Best can foam gun on the market. I have been an insulation installer for 13 years, and this gun is great! Especially with the tip extensions and getting in those tight spots.
It’s about time…You don’t know how many cans I lost due to poor dispensing
Take the first step to a job well done. Check our local and online retailers to find the perfect solution for your need.