Dispensing Guns

HOW TO CLEAN THE GREAT STUFF PRO™ DISPENSING GUN

The Great Stuff Pro™ Dispensing Gun is just like any other tool; the better you take care of it the better it takes care of you. Proper and regular use of Great Stuff™ Foam Cleaner will ensure you deliver professional results, again and again.

 
 
 

STEP BY STEP DIRECTIONS :  

  1. Make sure all flame sources are extinguished. 
  2. Unscrew used Great Stuff Pro™ can from the dispensing gun. 
  3. Clean the gun basket and tip by spraying and removing uncured foam with Great Stuff™ foam cleaner. 
  4. Invert the can and install the cleaner onto the dispensing gun with a twist.  
  5. Press the trigger to flush the foam from the gun into an appropriate waste receptacle until only the cleaner is visible.  
  6. Allow the dispensing gun to sit for several minutes. 
  7. Repeat with a second flush. 
  8. Remove the can from the dispensing gun. 
  9. Spray the gun one more time, without the can, until the gun is empty. 
  10. Store the dispensing gun in an upright position.

 

Helpful Tips:

  1. If the Great Stuff Pro™ Dispensing Gun is not used daily, it should be thoroughly purged weekly.
  2. Close the flow control knob when not in use to prevent premature discharge.
  3. Always leave a can of foam attached to the gun with the flow control screw closed. Use can within 30 days of initial use.
  4. NEVER leave a gun without a can of Great Stuff Pro™ attached unless the gun has been thoroughly cleaned with Great Stuff™ Foam Cleaner.
Materials
  • Eye protection
  • Gloves
  • Waste Receptacle
  • Great Stuff™ Foam Cleaner
  • Great Stuff Pro™ Dispensing Gun
 
 
 
Product Solutions
PRO SUGGESTED

PRO GUN

Uses a flow-control mechanism that dispenses beads from 1/8” to 3” to provide greater precision and access to hard-to-reach areas.

FOAM CLEANER

Extends the life of your Great Stuff Pro™ Dispensing Gun by dissolving uncured product from the valve, tip and collar of the gun.