Ready-to-use and easy to hide, GREAT STUFF™ Multipurpose Black Insulating Foam Sealant is the jack-of-all-trades solution for discreetly filling unwanted gaps across a wide range of projects, both inside and outside of the home.
1 Skin of cured foam can discolor if exposed to natural light. Paint or coat foam for the best results.
2 70 ± 5°F and 50 ± 5 % RH, 1-inch bead diameter, 6-inch length. The cure rate is dependent on temperature, humidity, and size of the foam bead.
*Do not expose cured foam to temperatures above 240ºF (116ºC).
Note: Great Stuff™ Insulating Foam Sealants are not for use in aviation, vehicle interior or under hood or food/beverage contact, or as structural support in marine applications.
What is Great Stuff™?
Great Stuff™ is the brand name for a line of one-component insulating foam sealants that can help make your home more comfortable and energy efficient by sealing the gaps and cracks where air conditioned and heated air escape. Great Stuff Pro™ Polyurethane Foam Sealants can be used for both small and large air sealing and retrofit applications by DIY’s or professionals. Great Stuff™ comes in cans with a straw applicator or the new patented Smart Dispenser™. Cans are in 12, 16, and 20 oz sizes. Great Stuff Pro™ series is available in larger cans (20,24, & 30 oz sizes) and use the dispensing guns to apply.
Can Great Stuff™ products be used outdoors?
Great Stuff™ and Great Stuff Pro™ products can be used outdoors. However, cured foam will discolor if exposed to ultraviolet (UV) light. If left exposed, the foam will eventually crumble. Paint or coat foam for best results in outdoor applications.
Great Stuff Pro™ Gasket is not approved for used outdoors
How do I get Great Stuff™ foam off of my skin?
If the foam has not cured or hardened, use fingernail polish remover (with acetone); a polyglycol-based skin cleanser or corn oil may be effective. Then wash with soap and plenty of water. If the foam has hardened, there is no solvent that will remove it. It will not harm your skin and will wear off over time. To remove cured foam from skin, use a pumice stone (available at most drug stores) and warm, soapy water. Then apply petroleum jelly.
Where can I use Great Stuff™ and Great Stuff Pro™ products?
Great Stuff™ and Great Stuff Pro™ products can be used in a variety of interior and exterior applications, most commonly in air sealing and home retrofit applications.
*Note: Great Stuff™ Insulating Foam Sealants are not for use in aviation, or food/beverage contact, or as structural support in marine applications.
What is the Great Stuff Smart Dispenser™?
The Smart Dispenser™ from the Great Stuff™ brand is a game-changing, industry best dispenser for one component can sealants.
Addressing all of the pain points of standard straw dispensers, the Smart Dispenser™ uses integrated mechanical parts to improve the user experience with Great Stuff Insulating Foam Sealants:
If using GREAT STUFF™ SMART DISPENSER™, follow these additional steps before application:
Pipe and Plumbing Penetrations
CHECK OUT OUR OTHER PRODUCTS
There’s a solution for every seal. See what else GREAT STUFF™ has to offer.
Expands to fill gaps and cracks up to 1". Use inside or out to fill gaps and cracks around plumbing lines and rim joists, in attics and basements, and more
Expands to fill gaps up to 3”. Use inside or out to fill big gaps and cracks around plumbing lines and rim joists, in attics and basements, and more
Specifically formulated, this multi-surface foam sealant features a uniquely white color, making it ideal for any light environment.
Designed for use in water features this foam helps direct water to flow over the rocks. It can be used in waterfalls, ponds, stream beds and hardscapes.
Best can foam gun on the market. I have been an insulation installer for 13 years, and this gun is great! Especially with the tip extensions and getting in those tight spots.
It’s about time…You don’t know how many cans I lost due to poor dispensing