great stuff logo
 
 
 

Insulating Foam Sealants

Multipurpose Black with Smart Dispenser™

  • Expands to fill, seal, and insulate gaps up to 1” (25mm).
  • Smart Dispenser™ provides precision, control, reusability
  • Multipurpose interior/exterior use1
  • Black color blends naturally into the surrounding environment
Where to buy?
 
 
 
 
 
 

Suggested Products

Foam Cleaner

Heavy Duty Work Wipes

Latex & Nitrile Blend Disposable Gloves
 
 
 
 
 
 
  • More Product Details

    Multipurpose Black Insulating Foam Sealant is a ready-to-use, foam sealant that fills, seals and insulates gaps up to 1 inch. Specifically formulated for both indoor and outdoor use1, this multipurpose formulation can seal gaps and cracks in masonry, gas lines, landscaping, plumbing penetrations, vehicles, boats and much more.

    • Multipurpose interior/exterior use1
    • Black color blends naturally into the surrounding environment
    • Expands to fills, seals, and insulates gaps up to 1 inch (25mm)
    • Forms a long-lasting, airtight, weather-resistant seal
    • Helps reduce unwanted noise and vibration
    • Adheres to wood, metal, masonry, glass and most plastics
    • Tack-free in 5-15 minutes2; trimmable in one hour
    • All-direction dispensing.
    • Paintable, stainable and sandable
    • UL classified
    • CCMC 13074-L

    1 Skin of cured foam can discolor if exposed to natural light. Paint or coat foam for the best results.

    2 70 ± 5°F and 50 ± 5 % RH, 1-inch bead diameter, 6-inch length. The cure rate is dependent on temperature, humidity, and size of the foam bead.

    *Do not expose cured foam to temperatures above 240ºF (116ºC).

    Note: Great Stuff™ Insulating Foam Sealants are not for use in aviation, vehicle interior or under hood or food/beverage contact, or as structural support in marine applications.

    • Shake vigorously for a minimum of 60 seconds. If the can sputters, simply shake the can while held upside down.
    • Any uncured product that gets on the skin can be removed with acetone.
    • Best results if used when product temperature ranges from 60-90°F (15-32°C). The can should not be exposed to temperatures more than 120°F. Cured foam should not be exposed to temperatures in excess of 240°F.
    • Firmly screw straw assembly onto valve and dispense SLOWLY.
    • Mist with water to speed cure.
    • Trim cured foam with serrated blade.
    • If applied outdoors, be sure to paint or cover foam to prevent discoloration and UV damage.
    • Great Stuff ™ cans featuring the straw tube applicator will seal shut if left to sit for more than 2 hours after its last use.
    • If using GREAT STUFF™ SMART DISPENSER™, follow these additional steps before application:
    • Great Stuff™ cans featuring the Smart Dispenser™ may be reused up to 30 days with the straw left attached to the canister, just clean the tip after your first use.
    • For best results:
    • Thread the SMART DISPENSER™ onto the valve until it is secure, ensuring there is no gap between the dispenser and the valve.
    • Do not unwind the dispenser after you have started using it.
    • Let up on the trigger slowly to release pressure in the straw and prevent spurts during the next use and to achieve the most consistent bead.

  • Q.Can Great Stuff™ products be used outdoors?

    A.

    Yes.
    Great Stuff™ and Great Stuff Pro™ products can be used outdoors. However, cured foam will discolor if exposed to ultraviolet (UV) light. If left exposed, the foam will eventually crumble. Paint or coat foam for best results in outdoor applications. Great Stuff Pro™ Gasket is not approved for used outdoors

    Q.How do I get Great Stuff™ foam off of my skin?

    A.

    If the foam has not cured or hardened, use fingernail polish remover (with acetone); a polyglycol-based skin cleanser or corn oil may be effective. Then wash with soap and plenty of water. If the foam has hardened, there is no solvent that will remove it. It will not harm your skin and will wear off over time. To remove cured foam from skin, use a pumice stone (available at most drug stores) and warm, soapy water. Then apply petroleum jelly.

    Q.What is Great Stuff™?

    A.

    Great Stuff™ is the brand name for a line of one-component insulating foam sealants that can help make your home more comfortable and energy efficient by sealing the gaps and cracks where air conditioned and heated air escape. Great Stuff Pro™ Polyurethane Foam Sealants can be used for both small and large air sealing and retrofit applications by DIY’s or professionals. Great Stuff™ comes in cans with a straw applicator or the new patented Smart Dispenser™. Cans are in 12, 16, and 20 oz sizes. Great Stuff Pro™ series is available in larger cans (20,24, & 30 oz sizes) and use the dispensing guns to apply.

    Q.What is the Great Stuff Smart Dispenser™?

    A.

    The Smart Dispenser™ from the Great Stuff™ brand is a game-changing, industry best dispenser for one component can sealants.

    Addressing all of the pain points of standard straw dispensers, the Smart Dispenser™ uses integrated mechanical parts to improve the user experience with Great Stuff Insulating Foam Sealants:

    Reusable up to 30 days; use it again and again!

    No dripping; the foam stops as you stop, as the trigger is released the foam ceases to dispense.

    Increased precision with more control and less mess, air seal with ease with the Smart Dispenser™.

    Q.Where can I use Great Stuff™ Multipurpose Black?

    A.

    Great Stuff™ and Great Stuff Pro™ products can be used in a variety of interior and exterior applications, most commonly in air sealing and home retrofit applications. Common applications include:

     

    Exterior of Electrical lines

    HVAC penetrations

    Small gaps and cracks in the attic or garage

    Air conditioning lines, refrigerant lines, gas lines – service penetrations

    Repair of masonry walls, sidewalks, and porches

    Outdoor landscaping applications

    RV and vehicle undercarriages3

    Trailer/transportation repairs3

    Marine sealing applications*

    *Note: Great Stuff™ Insulating Foam Sealants are not for use in aviation, or food/beverage contact, or as structural support in marine applications. 

     

 
 
 
 
 
 

Ratings & Reviews