GREAT STUFF™ Window & Door is a hybrid based, one component, insulation sealant and adhesive. It is easy to use and is a low odor hybrid. It can be used for windows, doors, trims, sealing roof tiles, air ducts, joints of the construction materials, water containers and similar joint parts. Paintable when fully dry. However, we recommend testing compatibility with paint before application.

Available in white, gray, and sandstone colors.

• Non-corrosive
• Adhesion to most substrates
• Low odor
• Resistant to UV degradation and weathering
• Free of solvents and isocyanates
• Low VOC (GS-244)
• No bubble formation
• Paintable when fully dry
• Easy to apply (GS-231)
• Non-Sag
• Resistant to chemicals
• Available in additional colors.
• Lifetime Product Warranty

• For best results, the surface must be clean, dry and free of dust, oil and grease, to ensure a clean and strong adherence between the sealant and the surface.
• Cut off the cartridge tip, screw on the removable nozzle and cut tip to your desired bead size. 
• Insert cartridge into caulking dispenser. 
• Hold at a 45° angle and apply ahead of nozzle to achieve a smooth seal. 
• Sealant normally dries to touch in 45 minutes.
• Uncured product can be cleaned with solvents. 
• Once cured, the product can be removed mechanically.
• Avoid contact with eyes and skin. Do not breathe vapors.
• Do not take internally. In case of eye contact, flush thoroughly with water. In case of skin contact, flush thoroughly with water. If breathed in, move person into fresh air.  If swallowed, do not induce vomiting. Call a physician immediately. 
• KEEP OUT OF REACH OF CHILDREN. INFO TRAC # 1-800-535-5053.